If you are following the trends in the multirotor community, you should have heard about the new BLHeli_S firmware. Currently there are not many ESCs that support this new firmware. Steven from Shenzhen´s ZTW company sent me their ZTW Flash 30A BLHeli_S ESC to test it. Thank you again for your support! Details: Silabs EFM8BB21F16
Continue reading...
Today I received the new LittleBee 20A Pro ESC from FVT. Thank you very much for that, Jenny! My review is not going to be very long, because the only difference with the old LittleBee 20A is the Silabs F396 MCU. Its core operate at 50Mhz, instead of 25MHz on the old F330 MCU. The
Continue reading...
New XRotor ESC has appeared on the HobbyWing website – the XRotor 20A Pro 4IN1. It is not another 4IN1, but have some interesting built-in features. Details: Dimension: 63 x 50 x 11.7mm Weight: 57g Driving Efficiency Optimization (DEO) OneShot 2-4S LiPo BEC: 5.3V & 12V I haven’t used an 4in1 ESC before, but got
Continue reading...
In Part II of my F40 motor review I am going to share the results from the thrust tests, as well as some pictures of the inner side of the T-Motor. Sadly my sample motor burned during the tests and I haven’t managed to finish all I have planned. The first test was with the
Continue reading...
Today I received the new KISS24A Race Edition ESC from flyduino. I covered some of the details about 2 weeks ago and now I will try to write a small review of it. I have tested it with the T-Motor MN2206 2000kv and the Scorpion M2204 2300kv on 3S and 4S LiPo. I made a
Continue reading...
Flyduino recently announced his new KISS ESC 24A Race Edition. It’s the next generation of the Keep It Super Simple (KISS) Series ESCs. The ESC has some new great features, which in my opinion would drive the Multirotor Hobby in a good direction. Details: Size: 19x27mm 32bit ARM Cortex 48MHz MCU AON6512 N-FETs Gate driver
Continue reading...
The FVT LittleBee 20A ESC a.k.a MRM Zeus are relatively new on the market, but already my Favorite. I have tested it with a T-Motor MN2206 2000kv with 6″ propeller. You can find the thrust results at the end of this article. But first some details about the LittleBee 20A: Size: 24.5×12.5x3mm Weight: 6.6g BLHeli
Continue reading...
