In Part II of my F40 motor review I am going to share the results from the thrust tests, as well as some pictures of the inner side of the T-Motor. Sadly my sample motor burned during the tests and I haven’t managed to finish all I have planned. The first test was with the
Continue reading...
I have received the upcoming 2204 2300kv motors from LD-Power Technology as well as the new KISS flight controller, so decided to build a new quadcopter. Used parts: SG Acro carbon frame KISS flight controller LDPower FR2204 2300kv motors Matek power distribution board XRotor 10A ESC (BLHeli 14.3) FrSky D4R-II receiver KingKong 6×4 propeller I
Continue reading...
Christmas holiday is over and it was time to complete my Part II of the LDPower FR2204 2300kv motor review. Check the Part I for details, motor quality and more pictures. In part II I have done only static thrust test on my motor thrust stand. I have used three different ESC to check for
Continue reading...
If you have an ESC with SiLabs MCU, like the HobbyWing XRotor 10A or T-Motor Air 10A, you can flash it with the BLHeli firmware using Arduino board. I will be using my Arduino UNO for the flashing process. If you have another Arduino board, like the Nano, check the pin outs in the 4way-interface
Continue reading...
Two weeks ago I posted an article about the XRotor 10A ESC, which I wanted to use for my next acro quadcopter. I wanted to download the English manual from the HobbyWing website and noticed these new XRotor 15A ESC. The XRotor 10A performs in my opinion great and HobbyWing claims the new XRotor 15A
Continue reading...
Some time ago I looked for small, qualitative and not expensive ESC for my SG Acro quadcopter and I found the HobbyWing XRotor 10A. Ordered four of these and 2 weeks later they are by me. They came well packaged, but with manual in Chinese. This is actually normal as I ordered the Asia-Version, because
Continue reading...
