New XRotor ESC has appeared on the HobbyWing website – the XRotor 20A Pro 4IN1. It is not another 4IN1, but have some interesting built-in features. Details: Dimension: 63 x 50 x 11.7mm Weight: 57g Driving Efficiency Optimization (DEO) OneShot 2-4S LiPo BEC: 5.3V & 12V I haven’t used an 4in1 ESC before, but got
Continue reading...
Today I received the new KISS24A Race Edition ESC from flyduino. I covered some of the details about 2 weeks ago and now I will try to write a small review of it. I have tested it with the T-Motor MN2206 2000kv and the Scorpion M2204 2300kv on 3S and 4S LiPo. I made a
Continue reading...
Flyduino recently announced his new KISS ESC 24A Race Edition. It’s the next generation of the Keep It Super Simple (KISS) Series ESCs. The ESC has some new great features, which in my opinion would drive the Multirotor Hobby in a good direction. Details: Size: 19x27mm 32bit ARM Cortex 48MHz MCU AON6512 N-FETs Gate driver
Continue reading...
The FVT LittleBee 20A ESC a.k.a MRM Zeus are relatively new on the market, but already my Favorite. I have tested it with a T-Motor MN2206 2000kv with 6″ propeller. You can find the thrust results at the end of this article. But first some details about the LittleBee 20A: Size: 24.5×12.5x3mm Weight: 6.6g BLHeli
Continue reading...
Two weeks ago I posted an article about the XRotor 10A ESC, which I wanted to use for my next acro quadcopter. I wanted to download the English manual from the HobbyWing website and noticed these new XRotor 15A ESC. The XRotor 10A performs in my opinion great and HobbyWing claims the new XRotor 15A
Continue reading...
Both SimonK and BLHeli firmwares are getting updates, new features and I was wondering which of these is better for my quadcopter. I have always used SimonK firmware and I am still happy with it. Here I will try to find out, if BLHeli performs better. I will also test the T-Motor 10A Air ESC,
Continue reading...
Many of the ESCs on the market have their own firmware and are not optimized for using in multicopters. For best performance you need to flash the ESCs with a special multirotor firmware. Note: Not all of the ESCs can be flashed with these firmwares. Check this list to see which ESCs are supported. The
Continue reading...
