For those following my blog and Facebook page, you know I love testing new products and pushing these to their limits. Today I am going to share my view about the Flycolor Raptopr ESCs. First of all I want to thank Charmant from Flycolor for sending me some units! Here are the ESCs, that I
Continue reading...
HobbyWing XRotor 20A ESC has been on the market for multirotor ESCs for a while. However its Silabs F396 MCU is now getting a trend among other ESC brands. It allows the ESC to run high KV motors without problems. This is why I decided to make a review of the XRotor 20A. Let’s start
Continue reading...
Today I received the new LittleBee 20A Pro ESC from FVT. Thank you very much for that, Jenny! My review is not going to be very long, because the only difference with the old LittleBee 20A is the Silabs F396 MCU. Its core operate at 50Mhz, instead of 25MHz on the old F330 MCU. The
Continue reading...
DJI, the leading drone company, has announced two new electronic speed controllers – DJI Takyon Z318 and Z420. It has been a long time, since DJI lastly offered DIY drone parts. Obviously it is going to enter the rapidly growing FPV racing market and these two ESCs are just the beginning. The DJI Takyon Z318
Continue reading...
The FVT LittleBee 20A got very popular in the past six months and it is indeed a great ESC. I am currently using 4 x LittleBee 20A ESCs on my SG Acro quad with the new F40 2500kv motors and I am very happy with the performance. But there are some thrust test with a
Continue reading...
Few years ago it was not an easy job flashing special multirotor firmware to the ESCs. You needed to remove the shrink tube, use DIY cables or at least an Atmega Flashing Tool. Then we got the 1-wire protocol for easily flashing ESC via the signal cable. But we still needed to use additional adapters
Continue reading...
I have done some minor changes on my SG Acro quadcopter frame in the past and finally get it from the CNC-factory. The build log will be short, as I already have done a similar one. Here are the parts, that I have used for it: SG Acro v1.2 frame Sparky 2.0 flight controller T-Motor
Continue reading...
