DroneHiTech.com

  • News
  • Reviews
  • How-To
  • Basics
  • Projects
  • About

Custom frame settings

  • 31. October 2015
  • /
  • Basics
  • /
  • No Comments

If your frame is not a standard X or H frame, here you find the basics on how to configure your flight controller for this custom frame. There are two methods about getting the right values for your controller. The first one is by using the angles between the arms and the Roll and Pitch
Continue reading...

  • custom frame flight controller

Naze32 custom motor mix for V-Type frame

  • 31. October 2015
  • /
  • How-To
  • /
  • No Comments

I use the Naze32 board on my new SG Adventure Mini frame. It is a custom V-Type frame like the TBS Discovery and Dead Cat frame. The qaudcopter flew great on a standard X configuration, but I wanted it to be properly configured. Made the measurements in AutoCAD, but I also printed it on A4
Continue reading...

  • custom frame flight controller KK2.0 Naze32

KK2.0 board Mixer Settings

  • 31. October 2015
  • /
  • How-To
  • /
  • No Comments

My new carbon frame was designed to be used for FPV flights and filming with my GoPro Hero 3. The arms on the front have a wider angle; instead of 45°, it is 60° measured to the pitch axis. In order to have a perfect flight experience, I should change these settings in the Mixer
Continue reading...

  • custom frame flight controller KK2.0 SG Adventure

Languages

  • enEnglish

Facebook Page

Facebook Page
DJI´s 2022 latest mini drone with 4K video.

Recent Posts

  • T-Motor F60 Pro IV Review and thrust test
  • iFlight DC5 HD – DJI FPV build log
  • Aikon F7 Mini V2 for DJI FPV System
  • DJI FPV quadcopter build log
  • FrSky Taranis X-Lite Transmitter Review
  • DJI introduces the new Matrice 200 Series V2 drones
  • T-Motor F40 Pro III Review

Categories

  • Basics 9
  • How-To 41
  • News 61
  • Projects 12
  • Reviews 78
  • Video 10

Aikon F7 Mini V2 for DJI FPV System

DJI FPV quadcopter build log

DJI introduces the new Matrice 200 Series V2 drones

DJI Student discount for drones

DJI Z30–Industrial grade zoom camera

New drone regulations in Germany

Waterproof bag for DJI Mavic Pro

New DJI Mavic Pro Accessories

Phantom 4 Chinese New Year Edition

DJI Snail Review

Subscribe

Enter your email to subscribe to DroneHiTech.com and receive notifications of new posts.

Top 7

  • Disable the safety switch on Pixhawk
    Disable the safety switch on Pixhawk
  • Flash Cleanflight on CC3D using Arduino
    Flash Cleanflight on CC3D using Arduino
  • Best BLHeli_S ESC for your drone
    Best BLHeli_S ESC for your drone
  • Flashing SimonK with Arduino through the signal wire (1-wire)
    Flashing SimonK with Arduino through the signal wire (1-wire)
  • T-Motor F60 Pro IV Review and thrust test
    T-Motor F60 Pro IV Review and thrust test
  • Turnigy Evolution Transmitter Review
    Turnigy Evolution Transmitter Review
  • Flash SiLabs ESC with BLHeli firmware
    Flash SiLabs ESC with BLHeli firmware

Tags

Aikon ArduCopter Arduino barometer battery Betaflight BLHeli BLHeli32 BLHeliS camera CC3D Cleanflight Cobra compass damped light DJI drone DYS EMAX ESC F40 firmware update flight controller Flycolor FPV frame FrSky KISS LiPo LittleBee Motors Naze32 OneShot125 Phantom Pixhawk propeller Quadcopter RunCam Scorpion SG Adventure SiLabs T-Motor Taranis video transmitter XRotor
DroneHiTech Copyright © 2015 · Theme design by Bluthemes