Lisam LS-210 Build Log

Main components: Frame: Lisam LS-210 Motors: Emax 2204 2300kV ESC: Flycolor Raptor 20A Receiver: X4R-SB FC: SPRacing F3 Acro PDB: Matek v3.1 Camera: HS1177 VTX: Skyzone TS5823S LED: Separate LED bar and buzzer LiPo: Turnigy Nano-tech 4s 1300 45C Step 1: Preparing all components First of all, I started with polishing the carbon frame. It
Continue reading...

SPRacing F3 EVO FC Setup

The SPRacing F3 EVO is another flight controller, designed by Dominic Clifton. He stands behind the Cleanflight firmware and FCs like SPRacing F3 and SPRacing F3 Mini. I will start with some key features and show you how to setup the SPRacing F3 EVO. Key features: STM32 F3 processor MicroSD-Card socket Built-in Race transponder MPU9250
Continue reading...

Flash Raceflight on Sparky 2.0

Some time ago I decided to buy myself a Sparky 2.0 flight controller, because on paper it looked as the best Cleanflight flight controller for now. Details: STM32 F4 processor running at 168MHz MPU9250 Gyroscope/Accelerometer/Compass MS5611 Barometer 2MB dataflash chip FrSky Telemetry Integrated SBUS inverter CAN Bus Build in 433Mhz modem If you buy your
Continue reading...

BLHeli passthrough – easy ESC flashing

Few years ago it was not an easy job flashing special multirotor firmware to the ESCs. You needed to remove the shrink tube, use DIY cables or at least an Atmega Flashing Tool. Then we got the 1-wire protocol for easily flashing ESC via the signal cable. But we still needed to use additional adapters
Continue reading...